Dental Wet Model Trimmer Vacuum Former Wax Heater Square Vibrator Centrifugal

Description

Dental Wet Model Trimmer,Vacuum Former,Wax Heater Vibrator,Centrifugal Unit 1. Dental Lab 3-Well Wax Heater Wax Heating Analog Dipping Pot Melting Melter 110V   Features： Three Teflon coated non-stick reservoirs Illuminated On/Off switch Indicator light that goes off when unit reaches desired temperature Variable temperatures range = 60°F-270°F (30°C-130°C) Temperature controlled rapid heating Weight: 1.5KG Voltage: 110V   Description: Dental Lab Equipment Analog Wax Heater Pot is a high quality wax pot and ideal for all dental applications. Its temperature controlled heating system gives you a broad temperature range of 70°F to 237°F (21°C to 112°C). In addition, this wax pot features an insulated thermoplastic housing which remains cool while wax stays hot! 2. Dental La
Dental Wet Model Trimmer Vacuum Former Wax Heater Square Vibrator Centrifugal
Dental Wet Model Trimmer,Vacuum Former,Wax Heater Vibrator,Centrifugal Unit
1.
Dental Lab 3-Well Wax Heater Wax Heating Analog Dipping Pot Melting Melter 110V
🍋Features：
Three Teflon coated non-stick reservoirs
Illuminated On/Off switch
Indicator light that goes off when unit reaches desired temperature
Variable temperatures range = 60°F-270°F (30°C-130°C)
Temperature controlled rapid heating
Weight: 1.5KG
Voltage: 110V
🍋
Description:
Dental Lab Equipment Analog Wax Heater Pot is a high quality wax pot and ideal for all dental applications. Its temperature controlled heating system gives you a broad temperature range of 70°F to 237°F (21°C to 112°C). In addition, this wax pot features an insulated thermoplastic housing which remains cool while wax stays hot!
2.
Dental Lab Centrifugal Casting Machine Apparatus Centrifuge Crucible Machine
🍋
Features:
1. This centrifugal casting machine is indispensible for the production of high quality oral restorations. Durable and reliable, our casting apparatus easily handles most alloys with high melting-points that are used by dentists.
2. Cast denture frames, inlays, and crown bridges with ease! This item features a heavy duty spring and an adjustable balance mechanism and comes with 3 cradles and a pair of tongs.
🍋
Specification:
Dental Centrifugal casting machine(AE-5)
Working model: Manual
Weight: 13kg
Speed: 7000rpm
🍋
Package Including:
1 X Centrifugal Casting Machine Dental Lab Equipment Teeth Healthy
3. Dental Lab Vibrator 4" Round Variable Speed Shaker Oscillator Mixing Gypsum
This variable-intensity model vibrator is ideal for mixing plaster/gypsum, pouring models, and investing. Quiet, powerful, and highly durable, this is the perfect tool for any dentist! It comes brand new in original factory packagin and is covered by a one year warranty.
🍋
Specifications：
Voltage: A)110V/60Hz
±10%
Power: 100W
Dimensions: 14x15x11cm
4. Dental Laser Pin Drill Machine Teeth Pindex System Dentist Pin Planter 80W 110V
Dental Lab Equipment Laser Pin Drill Machine Teeth Pindex System Pin Planter
🍋
Specifications:
This machine is special precise equipment for odontology,which uses laser to guarantee the hole’s accuracy and this drill is made of hardened alloy.The most important is the depth of drilled hole can be adjusted.
🍋
Features:
Laser beam guide for accurate location
High speed motor
🍋
Technical Data:
Voltage: 110V
Rotation Speed: 5500rpm
Power: 80W
Drill Bit Diameter: Φ3×Φ1.85、Φ3×Φ1.95
Size: 140x150x320mm
🍋
Packing List:
1* Main Unit
1* Power Cord
2* Tip
5. Dental Grind Inner Arch Trimmer Laboratory Model Machine 80W+Tungsten Steel Dril
Dental Lab Grind Inner Laboratory Model Arch Trimmer
Feature
:
It is a new kind of model trimmer and it don’t need connect water,can be connect to vacuum cleaner.
The rubber base can decrease the vibration and noise
Technical:
Voltage: 110 V
Power: 80w
Speed: 5500 rpm
Tungsten Steel drill: D12×H30mm
Size: 25×21×30
Weight: 5KG
Packing list:
Main unit*1
Tungsten Steel drill*1
6.  Dental Vacuum Forming & Molding Former Heater Thermoforming Material Machine Lab
1. Heavy-duty vacuum motor provides precise downward suction
2. Features a symmetrical heating system, ensuring uniform heat distribution
3. Adjustable, rust-resistant body accommodates various materials
4. Suitable for a wide range of clinical applications
5. Non-rotating sliding frame makes operation easy and stress-free
6. Compatible with all dental thermoplastics
7. The motor of vacuum former is strategically placed below its perforated stage,
which creates a direct downward suction, ensuring the utmost precision.
8. Durable and user-friendly, the machine will withstand years of rigorous use and prove to be an indispensable tool for any dental office.
Application Range
1. Decolorization braces forming and production
2. Orthodontic appliances remain, arch molding and plywood production
3. Periodontal disease, fluoride treatment and production of the molding tray
4. Temporary, permanent base, dental care of the molding and production
Technical Data:
Model: JT-018
Voltage: 110V/50Hz ± 10%
Motor Power: 800W
Heating Power: 600W
Forming size:110mm*110mm
Dimensions: 25 × 21 × 30cm
Weight: 6kg
Package With:
Main unit x 1
Power cord x 1
Manual x 1
NOTE: Please do not forget to turn off heating switch after using the machine, otherwise the heater will be burnt!
7.  Dental Wet Model Shaping Trimmer Abrasive Disc Wheel Dental Plaster Finisher
Features:
1. Connect one end of the water tube to the nozzle of the wet model trimmer and the other end to the tap, open the valve
2. Connect the waste-disposal tube to the unit
3. Connect the power cord, and switch on the power switch (O=off, l=on)
4. When braking, it is normal to hear clicking before the sand tablet stops. If the sand tablet makes unusually loud noises, remove it, and use the included hex-wrench to adjust the screw on the back cover (18)
5. To check if you need to replace the abrasive disk, rotate the disk by hand and estimate: if the platform jumps more than 2mm, change the disk. After replacing the disk, make sure to tighten the ring on the platform 8 (closest to the outside of the sand tablet)
Attention:
If there is some abnormal noise when working on
Possible reason
：
①
Axon is loosing
②
Disc is not plain enough
。
How to solve it
：
①
Dissemble the disc
⒃
with spanner
，
make the snap
Ring tightly
；
②
change the disc
。
The machine does not work when power on
Possible reason
：
①
fuse get burnt
；
②
motor get burnt
；
③
switch get wrong
.
How to solve it
：
①
change the fuse
（
22
）
which inside the socket
；
②
change the motor ③ change the switch
Specifications
Voltage: 110V/60Hz±10%
Power: 500W Rotational Speed: 2800 rpm
Dimensions: 44×35×35cm Weight of the dental trimmer: 20kg
Content:
1x JT-19 Wet Model Trimmer Abrasive Disc Wheel Dental Lab Equipment\
Statement (FDA, ARTG)
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and
state and local regulatory agencies.
If the item is subject to FDA regulation,
I will verify your status as an authorized purchaser of this item before shipping of the item.
If you have questions about legal obligations regarding sales of medical devices,
you should consult with the FDA's Center for Devices and Radiological Health:
https://www.fda.gov/cdrh/devadvice/
https://www.fda.gov/cdrh/industry/support/index.html
Thank you for your cooperation.
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept ebay payment 。
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Delivery details
Shipping:
2-9 working days to: USA
Terms of sales
We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
About us
Your satis
faction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Contact us
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
On Aug 17, 2022 at 01:44:52 PDT, seller added the following information: